For 1990-2009 cars only
Removal Procedure
- Disconnect the negative battery cable.
- Remove the screws and the rear console box.
- Remove the rear console cover and disconnect the connector.
- Remove the screws and heating mat switch.
Warning: Refer to Battery Disconnect Warning in the Preface section.
Installation Procedure
- Install the heating mat switch with the screws and tighten to 2 N·m (18 lb in).
- Connect the connector and install the rear console cover.
- Install the rear console box with the screws and tighten to 2 N·m (18 lb in).
- Connect the negative battery cable.
Caution: Refer to Fastener Caution in the Preface section.
