Rear Seat Belt Buckle Replacement Left - C100

1. Fold the left rear seat forward.



2. Remove the screws and the rear seat outboard covers.



3. Remove the upper clip on the gas support assembly.
4. Disconnect the upper joint of the gas support assembly.



5. Remove the screws and the rear seat inboard cover.



6. Remove the bolt (1) and the seat belt buckle (2).

Caution: Refer to Fastener Caution in the Preface section.




1. Install the seat belt buckle (2) and secure with bolt (1) and tighten to 38 N·m (28 lb ft).



2. Install the rear seat inboard cover and sure with the screws.



3. Connect the upper joint of the gas support assembly and install the clip.



4. Install the rear seat outboard covers and secure with the screws.

Rear Seat Belt Buckle Replacement Left - C105

1. Remove the screws and the compartment front tray.



2. Fold the left rear seatback forward.
3. Release the seat lock by pushing the lever forward on both seat legs.
4. Fold the rear left seat assembly forward.



5. Remove the bolt (1) and the seat belt buckle (2).

Caution: Refer to Fastener Caution in the Preface section.




1. Install the seat belt buckle (2) and secure with bolt (1) and tighten to 38 N·m (28 lb ft).
2. Reposition the left rear seat assembly.



3. Install the compartment front tray and the screws.

Rear Seat Belt Buckle Replacement Right - C100

1. Fold the right rear seat forward.
2. Remove the screws and the rear seat left outboard cover.



3. Remove the seat joint bolt (1) that connects the seatback to the cushion.
4. Remove the bolt (2) and the seat belt buckle (3).

Caution: Refer to Fastener Caution in the Preface section.




1. Install the seat belt buckle (3) and secure with bolt (2) and tighten to 38 N·m (28 lb ft).
2. Install the seat joint bolt (1) that connects the seatback to the cushion.



3. Install the rear seat left outboard cover and secure with the screws.

Rear Seat Belt Buckle Replacement Right - C105

1. Remove the screws and the compartment front tray.



2. Fold the right rear seatback forward.
3. Release the seat lock by pushing the lever forward on both seat legs.
4. Fold the rear right seat assembly forward.



5. Remove the screws and and the left seat cover.



6. Remove the seat joint bolt that connects the seatback to the cushion.
7. Remove the bolt (1) and the seat belt buckle (2).

Caution: Refer to Fastener Caution in the Preface section.




1. Install the seat belt buckle (2) and secure with bolt (1) and tighten to 38 N·m (28 lb ft).
2. Install the seat joint bolt that connects the seatback to the cushion.



3. Install the left seat cover and screws.
4. Reposition the right rear seat assembly.



5. Install the compartment front tray and the screws.