GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Holden 🢒 2009 🢒 Captiva 🢒 Safety and Security 🢒 Theft Deterrent 🢒 Theft Deterrent Vehicle Inclination Sensor Replacement

Removal Procedure

    Warning: Refer to Battery Disconnect Warning in the Preface section.


    Object Number: 1837496 Size: SH
  1. Disconnect the negative battery cable.
  2. Remove the left front seat. Refer to Bucket Seat Replacement.
  3. Disconnect the electrical connector from the inclination sensor.
  4. Remove the inclination sensor from the bracket by sliding the sensor rearward.
  5. Remove the bracket by removing the bolts, if needed.

Installation Procedure

    Caution: Refer to Fastener Caution in the Preface section.


    Object Number: 1855665 Size: SH
  1. Install the inclination sensor in the bracket with bolts (1) and tighten to 10 N m (7 lb ft).
  2. Install the inclination sensor on the bracket.
  3. Connect the connector of inclination sensor.
  4. Install the left front seat. Refer to Bucket Seat Replacement.
  5. Connect the negative battery cable.