GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Holden 🢒 2009 🢒 Captiva 🢒 Preface 🢒 Dangers, Warnings, and Cautions 🢒 Air Cleaner Assembly Replacement

Removal Procedure

    Warning: Refer to Battery Disconnect Warning in the Preface section.


    Object Number: 1758465 Size: SH
  1. Disconnect the negative battery cable.
  2. Disconnect the intake air temperature (IAT) sensor connector.
  3. Loosen the clamp and disconnect the air cleaner outlet hose from the resonator.

    4. Object Number: 1758476 Size: SH
  4. Remove the air cleaner housing bolts.
  5. Unclip the housing from the ball stud and then remove the air cleaner assembly.

Installation Procedure

    Object Number: 1758476 Size: SH
  1. Install the air cleaner assembly.
  2. Install the air cleaner housing to the ball stud and connect the air cleaner outlet hose to the resonator.

    3. Caution: Refer to Fastener Caution in the Preface section.

  3. Install the air cleaner housing bolts.

    4. Tighten
    Tighten the air cleaner housing bolts to 6 N·m (53 lb in).