GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Holden 🢒 2009 🢒 Captiva 🢒 Preface 🢒 Dangers, Warnings, and Cautions 🢒 Parking Brake Cable Replacement

Removal Procedure
  1. Release the park brake.
  2. Remove the console. Refer to Console Replacement.

    3. Object Number: 1764789 Size: SH
  3. Measure the thread length from the end of the pull rod to the hex nut.
  4. Remove the park brake adjustment nut from the eye bolt pull rod.
  5. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.

    6. Object Number: 1764797 Size: SH
  6. Remove the park brake cable ends from the park brake cable equalizer.
  7. Remove the park brake cable equalizer.
  8. Remove the park brake cable from the park brake actuator.

    9. Object Number: 1764810 Size: SH
  9. Remove the park brake cable to underbody bolts.
  10. Remove the park brake cable.

Installation Procedure
  1. Install the park brake cable to the park brake actuator.

    2. Caution: Refer to Fastener Caution in the Preface section.


    Object Number: 1764810 Size: SH
  2. Install the park brake cable bracket to underbody bolts and tighten to 23 N·m (17 lb ft).

    3. Object Number: 1764797 Size: SH
  3. Install the park brake cable equalizer.
  4. Install the park brake cable ends to the park brake cable equalizer.
  5. Lower the vehicle.

    6. Object Number: 1764789 Size: SH
  6. Install the park brake adjustment nut to the eye bolt pull rod. Inspect the park brake adjustment by referring to the original removal adjustment nut measurement taken in the removal procedure. Refer to Park Brake Adjustment.
  7. Install the console. Refer to Console Replacement.