GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Holden 🢒 2009 🢒 Captiva 🢒 Preface 🢒 Dangers, Warnings, and Cautions 🢒 Body Side Window Rear Garnish Molding Replacement

Body Side Window Rear Garnish Molding Replacement C100/Long Body

Removal Procedure

    Object Number: 1758275 Size: SH
  1. Remove the rear seat lower belts. Refer to Seat Belt Retractor Replacement - No. 1 Rear or Seat Belt Retractor Replacement - No. 2 Rear.
  2. Remove the screws and the quarter window garnish molding.

Installation Procedure

    Caution: Refer to Fastener Caution in the Preface section.


    Object Number: 1758275 Size: SH
  1. Install the quarter window garnish molding with the screws and tighten to 2 N·m (18 lb in).
  2. Install the rear seat lower belts. Refer to Seat Belt Retractor Replacement - No. 1 Rear or Seat Belt Retractor Replacement - No. 2 Rear.

Body Side Window Rear Garnish Molding Replacement C105/Short Body

Removal Procedure

    Object Number: 1829829 Size: SH
  1. Remove the rear seat lower belts. Refer to Seat Belt Retractor Replacement - No. 1 Rear or Seat Belt Retractor Replacement - No. 2 Rear.
  2. Remove the screws and the quarter window garnish molding.

Installation Procedure

    Caution: Refer to Fastener Caution in the Preface section.


    Object Number: 1829829 Size: SH
  1. Install the quarter window garnish molding with the screws and tighten to 2 N·m (18 lb in).
  2. Install the rear seat lower belts. Refer to Seat Belt Retractor Replacement - No. 1 Rear or Seat Belt Retractor Replacement - No. 2 Rear.