GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Holden 🢒 2009 🢒 Captiva 🢒 Preface 🢒 Dangers, Warnings, and Cautions 🢒 Reading Lamp Replacement

Removal Procedure

    Warning: Refer to Battery Disconnect Warning in the Preface section.

  1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection.

    2. Object Number: 1758352 Size: SH
  2. Pry off the reading lamp lens by inserting a screwdriver into the recess along the edge of the lens.
  3. Remove the screws and the reading lamp housing from the headliner.
  4. Disconnect the electrical connector.
  5. Remove the bulb.

Installation Procedure

    Object Number: 1758353 Size: SH
  1. Install the replacement bulb.
  2. Connect the electrical connector.

    3. Caution: Refer to Fastener Caution in the Preface section.

  3. Install the reading lamp housing to the headliner with the screws and tighten to 2 N·m (18 lb in).
  4. Press the reading lamp lens onto the housing.
  5. Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection.