GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Holden 🢒 2007 🢒 Epica 🢒 Transmission/Transaxle 🢒 Manual Transaxle - D24 🢒 Speedometer Driven Gear Replacement

Removal Procedure

    Object Number: 1862870 Size: SH
  1. Disconnect the speedometer driven gear electrical wiring connector.

    2. Object Number: 1862871 Size: SH
  2. Remove the speedometer driven gear bolt.

    3. Object Number: 1862872 Size: SH
  3. Remove the speedometer driven gear.

Installation Procedure

    Object Number: 1862872 Size: SH
  1. Install the speedometer driven gear.

    2. Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 1862871 Size: SH
  2. Install the speedometer driven gear bolt.

    3. Tighten
    Tighten the speedometer driven gear bolt to 3-5 N·m (27-44 lb in).


    Object Number: 1862870 Size: SH
  3. Connect the speedometer driven gear electrical wiring connector.