1

DT-47811-A Transmission Lift Plate

Caution: Handle with care, the transmission assembly weighs over 83 Kg (183 lbs). Bodily injury could occur if not handled properly.

Notice: Refer to Fastener Notice in the Preface section.

Tighten
Tighten bolts and nut to 12 N·m (106 lb in).

Tip
After installation of lift plate, raise the transmission with an overhead hoist.

2

J-46625 Transmission Holding Fixture

J-46625-10 Holding Fixture Adapter

Tip
Adjust mounting block on fixture to match bosses on case, then tighten bolts to 13 N·m (10 lb ft).