GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Holden 🢒 2008 🢒 Epica 🢒 Body Hardware and Trim 🢒 Interior Trim and Paneling 🢒 Center Pillar Upper Trim Panel Replacement

Removal Procedure

    Object Number: 1256612 Size: SH
  1. Remove the bolt and the upper front seat belt anchor.
  2. Reposition the upper portion of the lower center pillar.
  3. Pry off the upper center pillar trim panel.

Installation Procedure

    Object Number: 1256612 Size: SH
  1. Install the upper center pillar trim panel.
  2. Install the upper portion of the lower center pillar trim panel to its original position.

    3. Notice: Refer to Fastener Notice in the Preface section.

  3. Install the upper front seat belt anchor with the bolt.

    4. Tighten
    Tighten the seat belt anchor bolt to 38 N·m (28 lb ft).