Special Tools

1. Relieve the fuel pressure. Refer to Fuel Pressure Relief.



2. Remove the fasteners from the engine cover.
3. Remove the engine cover from the engine.



4. Disconnect the quick connect coupling of the fuel feed hose (3) from the fuel feed pipe of the fuel rail. Use a shop towel in order to catch any remaining fuel that may leak.
5. Install the J 42982 between the fuel feed pipe of the fuel rail and of the fuel feed hose.



6. Install the J 34730-1A to the J 42982 , and tighten securely.
7. Install fuel pump fuse.
8. Turn ON the ignition in order to pressurize the fuel system.
9. Turn OFF the ignition.
10. Check for any fuel leaks.

1. Relieve the fuel pressure. Refer to the Fuel Pressure Relief.



2. Remove the J 34730-1A from the J 42982 .
3. Using the CH-47831 , disconnect the quick connect coupling of the J 42982 from the fuel feed pipe of the fuel rail. Use a shop towel in order to catch any remaining fuel that may leak.
4. Disconnect the quick connect coupling of the fuel feed hose (3) from the J 42982 , and remove the adapter. Use a shop towel in order to catch any remaining fuel that may leak.



5. Connect the quick-connect fitting of the fuel feed hose (3) to the fuel feed pipe of the fuel rail.
6. Install fuel pump fuse.
7. Turn ON the ignition in order to pressurize the fuel system.
8. Turn OFF the ignition.
9. Check for any fuel leaks.



10. Install the engine cover.

Caution: Refer to Fastener Caution in the Preface section.

11. Secure the engine cover with the fasteners and tighten to 10 N·m (89 lb in).