GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Holden 🢒 2009 🢒 Epica 🢒 Engine 🢒 Engine Controls and Fuel - 2.0L and 2.5L 🢒 Crankshaft Position Sensor Replacement

Removal Procedure

    Warning: Refer to Battery Disconnect Warning in the Preface section.


    Object Number: 1375157 Size: SH
  1. Disconnect the negative battery cable.
  2. Remove the air filter outlet hose.

    3. Object Number: 1375337 Size: SH
  3. Disconnect the crankshaft position (CKP) sensor wiring harness connector.

    4. Object Number: 1375340 Size: SH
  4. Remove the CKP sensor heat shield housing.

    5. Object Number: 1375341 Size: SH
  5. Remove the CKP sensor.

Installation Procedure

    Caution: Refer to Fastener Caution in the Preface section.


    Object Number: 1375342 Size: SH
  1. Install the CKP sensor and tighten the retaining bolt to 7 N·m (62 lb in).

    2. Object Number: 1375344 Size: SH
  2. Install the CKP sensor heat shield housing and tighten the bolt to 8 N·m (71 lb in).

    3. Object Number: 1375337 Size: SH
  3. Connect the CKP sensor wiring harness connector.

    4. Object Number: 1375157 Size: SH
  4. Install the air filter outlet hose.
  5. Connect the negative battery cable.