GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Holden 🢒 2009 🢒 Epica 🢒 Engine 🢒 Engine Electrical 🢒 Front Seat Back Replacement

Removal Procedure

    Object Number: 1256644 Size: SH
  1. Remove the front bucket seat from vehicle. Refer to Front Seat Replacement - Bucket.
  2. Remove the screws and slide the back panel down to remove it.

    3. Object Number: 1256645 Size: SH
  3. Remove the each seat trim.
  4. Disconnect the electrical connectors.
  5. Remove the bolts and the seat back.

Installation Procedure

    Object Number: 1256645 Size: SH
  1. Install the seat back onto the seat cushion.

    2. Caution: Refer to Fastener Caution in the Preface section.

  2. Install the front seat back bolts and tighten to 45 N·m (33 lb ft).
  3. Connect the electrical connectors.

    4. Object Number: 1256644 Size: SH
  4. Install the seat trims to its original position.
  5. Install the back panel onto the seat with the screws and tighten to 12 N·m (106 lb in).
  6. Install the front bucket seat in the vehicle. Refer to Front Seat Replacement - Bucket.