Removal Procedure
Warning: Refer to Battery Disconnect Warning in the Preface section.
- Disconnect the negative battery cable.
- Remove engine cover. Refer to
Engine Cover Replacement.
- Disconnect the boost pressure sensor connector.
- Remove the engine wiring harness cover upward.
- Remove the boost pressure sensor.
Installation Procedure
Caution: Refer to Fastener Caution in the Preface section.
- Install the boost pressure sensor using the pressure sensor bolt and tighten to
8 N·m (70.8 lb in).
- Install the engine wiring harness cover.
- Connect the boost pressure sensor connector.
- Connect the negative battery cable.