Removal Procedure
Warning: Refer to Battery Disconnect Warning in the Preface section.
- Disconnect the negative battery cable.
- Remove the engine cover. Refer to
Engine Cover Replacement.
- Disconnect the EGR vacuum solenoid valve inlet/outlet hoses.
- Disconnect the EGR vacuum solenoid valve connector.
- Remove the EGR vacuum solenoid valve.
Installation Procedure
Caution: Refer to Fastener Caution in the Preface section.
- Install the EGR vacuum solenoid valve using the retaining bolts and tighten to
7 N·m (62 lb in).
- Connect the EGR vacuum solenoid valve connector.
- Connect the EGR vacuum solenoid valve inlet/outlet hoses.
- Install the engine cover. Refer to
Engine Cover Replacement.
- Connect the negative battery cable.