For 1990-2009 cars only
Removal Procedure
- Disable the SIR system. Refer to SIR Disabling and Enabling
- Remove the instrument panel (I/P) storage compartment. Refer to Instrument Panel Storage Compartment Replacement.
- Disconnect the passenger air bag yellow electrical connector.
- Remove the I/P module by removing the mounting nuts from the upper I/P.
Warning: Refer to Sensing and Diagnostic Module Handling Warning in the Preface section.
Warning: Refer to Battery Disconnect Warning in the Preface section.
Installation Procedure
- Install the I/P module.
- Install the passenger air bag mounting nuts and tighten to 7 N·m (62 lb in).
- Connect the passenger air bag yellow electrical connector.
- Install the I/P storage compartment. Refer to Instrument Panel Storage Compartment Replacement.
- Enable the SIR system. Refer to SIR Disabling and Enabling.
Caution: Refer to Fastener Caution in the Preface section.
