GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Holden 🢒 2009 🢒 Epica 🢒 Diagnostic Navigation 🢒 Vehicle Diagnostic Information 🢒 Inflatable Restraint Side Impact Sensor Replacement

Removal Procedure

    Warning: Refer to Sensing and Diagnostic Module Handling Warning in the Preface section.

    Warning: Refer to Battery Disconnect Warning in the Preface section.


    Object Number: 1814595 Size: SH
  1. Disable the SIR system. Refer to SIR Disabling and Enabling.
  2. Remove the trim from the center pillar.
  3. Remove the side impact sensor (SIS) mounting bolt.
  4. Disconnect the SIS connector.
  5. Remove the SIS.

Installation Procedure

    Object Number: 1814595 Size: SH
  1. Install the SIS.

    2. Caution: Refer to Fastener Caution in the Preface section.

  2. Install the SIS mounting bolt and tighten to 10 N·m (89 lb in).
  3. Connect the SIS connector.
  4. Install the trim on the center pillar.
  5. Enable the SIR system. Refer to SIR Disabling and Enabling.