GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Holden 🢒 2009 🢒 Epica 🢒 Suspension 🢒 Front Suspension 🢒 Stabilizer Shaft Replacement

Removal Procedure

    Object Number: 1255628 Size: SH
  1. Remove the crossmember.
  2. Remove the stabilizer link.
  3. Remove the stabilizer bar bolts and nuts.
  4. Remove the U-clamp and bushing.

Installation Procedure

    Object Number: 1255630 Size: SH
  1. Install the U-clamp and bushing with stabilizer bar.

    2. Caution: Refer to Fastener Caution in the Preface section.

  2. Install the stabilizer bar bolts and nuts and tighten to 50 N·m (37 lb ft).
  3. Install the stabilizer link and crossmember.