GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 1255667  Size: SH
  1. Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle.
  2. Remove the rear stabilizer link. Refer to Stabilizer Shaft Link Replacement.
  3. Remove the rear stabilizer bar bolt, U-clamp, and bushing.

Installation Procedure

    Caution: Refer to Fastener Caution in the Preface section.


    Object Number: 1255668  Size: SH
  1. Install the rear stabilizer bar bolt, U-clamp, and bushing and tighten to 50 N·m (37 lb ft).
  2. Install the rear stabilizer link. Refer to Stabilizer Shaft Link Replacement.