GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Holden 🢒 2009 🢒 Epica 🢒 Suspension 🢒 Rear Suspension 🢒 Rear Axle Upper Control Arm Replacement

Removal Procedure


    Object Number: 1255682 Size: SH
  1. Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle.
  2. Remove the rear wheels.
  3. Remove the upper arm nut-to-rear knuckle.

    4. Object Number: 1255683 Size: SH
  4. Remove the nuts upper arm-to-body.
  5. Remove the upper arm.

Installation Procedure

    Caution: Refer to Fastener Caution in the Preface section.


    Object Number: 1255682 Size: SH
  1. Install the upper arm with nuts-to-body and tighten to 60 N·m (44 lb ft).
  2. Install the upper arm nut-to-rear knuckle and tighten to 110 N·m (81 lb ft).