For 1990-2009 cars only
- Perform a preliminary inspection before any attempt is made to change or correct the wheel alignment factors. Refer to Preliminary Alignment Inspection.
- Loosen the front parallel link cam bolt to crossmember.
- Install the front parallel link cam bolt and tighten to 40 N·m (30 lb ft).
- Adjust the rear toe specification. Refer to Wheel Alignment Specifications for preferred specifications.
- Tighten the front parallel link cam bolt and tighten to 80 N·m (59 lb ft).
Caution: Refer to Fastener Caution in the Preface section.
