GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Holden 🢒 2009 🢒 Epica 🢒 Brakes 🢒 Hydraulic Brakes 🢒 Rear Brake Rotor Replacement

Removal Procedure

    Object Number: 1255719 Size: SH
  1. Remove the caliper. Refer to Rear Brake Caliper Replacement.
  2. Remove the brake shoes.
  3. Remove the caliper mounting bracket.

    4. Object Number: 1255721 Size: SH
  4. Remove the rotor detent screw.
  5. Remove the rotor.

Installation Procedure

    Caution: Refer to Fastener Caution in the Preface section.


    Object Number: 1255729 Size: SH

    Note: To guarantee uniform braking, always refinish both rotors even if only one rotor is defective.

  1. Install the rotor on the hub and install the detent screw and tighten to 4 N·m (35 lb in).

    2. Object Number: 1255719 Size: SH
  2. Apply a few drops of thread-locking compound to the caliper bracket mounting bolts and install the caliper bracket and tighten to 45 N·m (33 lb ft).
  3. Install the brake shoes and the caliper. Refer to Rear Brake Caliper Replacement.