GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Holden 🢒 2009 🢒 Epica 🢒 Transmission 🢒 Automatic Transmission - Aisin 55-51LE 🢒 Manual Shift Detent Lever and Park Pawl Installation

    Object Number: 749462 Size: SH
  1. Install the park pawl pin spring (704).
  2. Install the park pawl pin spring guide sleeve (705).

    3. Caution: Refer to Fastener Caution in the Preface section.

  3. Install the park pawl bolt/screw (706) and tighten to 10 N·m (89 lb in).

    4. Object Number: 749461 Size: SH
  4. Install the park pawl spring pin (703).

    5. Object Number: 798649 Size: SH
  5. Install the park pawl (702) and the park pawl actuator bracket (708).

    6. Object Number: 798650 Size: SH
  6. Install the park pawl return spring (701).
  7. Install the park pawl shaft (700).

    8. Object Number: 749456 Size: SH
  8. Install the manual shift detent spring assembly (711).

    9. Object Number: 749455 Size: SH
  9. Install and hand tighten the 14 mm manual shift detent lever spring bolt (712) and the 16.7 mm park pawl actuator bracket bolt (715).
    10. • Tighten the 14 mm manual shift detent lever spring bolt (712) to 5 N·m (44 lb in).
    • Tighten the 16.7 mm park pawl actuator bracket bolt (715) to 10 N·m (89 lb in).

    Object Number: 749454 Size: SH
  10. Install the park pawl actuator rod (709).

    11. Object Number: 749453 Size: SH
  11. Install the manual shift detent lever assembly (710).

    12. Note: The park pawl actuator rod (709) must be installed with the rod between the case and the manual shift detent lever.

  12. Connect the park pawl actuator rod (709) to the manual shift detent lever assembly (710).

    13. Object Number: 874467 Size: SH
  13. Using a screwdriver, lift the manual shift detent lever spring (711) and rotate the manual shift detent lever assembly (710) into position.