For 1990-2009 cars only
Removal Procedure
- Disconnect the negative battery cable.
- Separate the plastic clip from the end of each ball socket.
- Separate the ball sockets from the ball studs on the linkage bolts using a pry bar.
- Remove the control shift rod from the vehicle.
Warning: Refer to Battery Disconnect Warning in the Preface section.
Installation Procedure
- Install the control shift rod into the vehicle.
- Press the ball sockets onto the ball studs on the linkage bolts.
- Connect the plastic clip on the end of each ball socket.
- Connect the negative battery cable.
