For 1990-2009 cars only
Removal Procedure
- Remove the coin storage and the screws.
- Separate the hood release cable from the hood latch release handle.
- Carefully pull the instrument panel under cover until the mounting clips are released and the instrument panel under cover.
- Remove the bolts from the driver side knee bolster.
- Remove the knee bolster.
Installation Procedure
- Install the knee bolster with the bolts and tighten to 10 N·m (89 lb in).
- Install the instrument panel under cover.
- Connect the hood release cable to the hood latch release handle.
- Install the coin storage and the screws.
Caution: Refer to Fastener Caution in the Preface section.
