GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Holden 🢒 2009 🢒 Epica 🢒 Body Repair 🢒 Bolted Exterior Body Panels and Closures 🢒 Hood Primary and Secondary Latch Replacement

Removal Procedure

    Object Number: 1256880 Size: SH
  1. Open the hood.
  2. Mark the position of the hood latch on the radiator support to aid in alignment during installation.
  3. Remove the bolts and the hood latch.
  4. Disconnect the hood release cable.

Installation Procedure

    Object Number: 1256880 Size: SH
  1. Connect the hood release cable to the latch.
  2. Position the hood latch in the location marked during removal.

    3. Caution: Refer to Fastener Caution in the Preface section.

  3. Install the hood latch with the bolts and tighten to 10 N·m (89 lb in).
  4. Close the hood.