GM Service Manual Online
For 1990-2009 cars only
Makes
🢒
Holden
🢒
2009
🢒
Epica
🢒
HVAC
🢒
HVAC - Automatic
🢒 Air Inlet Valve Actuator Replacement
Removal Procedure
Warning:
Refer to
Battery Disconnect Warning
in the Preface section.
Disconnect the negative battery cable.
Remove the I/P storage compartment. Refer to
Instrument Panel Storage Compartment Replacement
.
Remove the actuating rod by snapping the rod out of the lever with needle-nose pliers.
Remove the actuating lever.
Disconnect the electrical connector.
Remove the motor retaining screws.
Remove the motor.
Installation Procedure
Install the motor.
Install the motor retaining bolts and tighten.
Install the actuating lever.
Install the actuating rod.
Connect the electrical connector.
Remove the I/P storage compartment. Refer to
Instrument Panel Storage Compartment Replacement
.
Connect the negative battery cable.