GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Holden 🢒 2009 🢒 Epica 🢒 Preface 🢒 Dangers, Warnings, and Cautions 🢒 Lifting and Jacking the Vehicle

Danger: To avoid any vehicle damage, serious personal injury or death when major components are removed from the vehicle and the vehicle is supported by a hoist, support the vehicle with jack stands at the opposite end from which the components are being removed and strap the vehicle to the hoist.

Caution: Refer to Vehicle Lifting and Jacking Caution in the Preface section.

Note: On vehicles equipped with rocker panel moldings, the rocker panel molding lower covers MUST be removed prior to lifting.

Lifting Points
Object Number: 1885410 Size: LF
(1)Frame Contact Hoist, Lower Rocker Panel Molding Covers
(1)Frame Contact Hoist, Lower Rocker Panel Molding Covers
(1)Frame Contact Hoist, Lower Rocker Panel Molding Covers
(1)Frame Contact Hoist, Lower Rocker Panel Molding Covers
(2)Floor Jack
(2)Floor Jack
(2)Floor Jack
(3)Suspension Contact Hoist
(3)Suspension Contact Hoist
(3)Suspension Contact Hoist
(4)Center Rocker Lift Point (Left Hand/Right Hand)
(5)Rear Suspension Axle Lift Point

Hoist Locations
Object Number: 1884394 Size: LF
(1)Frame Contact Hoist - Rearward of Front Tire
(2)Suspension Contact Hoist - Under Front Lower Control Arm
(3)Suspension Contact Hoist - Lifting on Rear Axle
(4)Frame Contact Hoist Points for Vehicles Equipped with Lower Rocker Panel Moldings (Covers Removed), Rearward of Front Tires and Forward of Rear Tires
(5)Frame Contact Hoist - Forward of Rear Tire