GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Holden 🢒 2009 🢒 Epica 🢒 General Information 🢒 General Information 🢒 Wheelhouse Splash Shield Replacement

Removal Procedure

    Caution: Refer to Vehicle Lifting and Jacking Caution in the Preface section.


    Object Number: 1256889 Size: SH
  1. Raise and suitably support the vehicle.
  2. Remove the front wheel. Refer to Tire and Wheel Removal and Installation.
  3. Remove the front mud guard. Refer to Rear Mud Flap Guard Replacement.
  4. Remove the screws and the front wheel well splash shield.

Installation Procedure

    Caution: Refer to Fastener Caution in the Preface section.


    Object Number: 1256889 Size: SH
  1. Install the screws and the front wheel well splash shield. Tighten the front wheel well splash shield screws to 2 N·m (18 lb in).
  2. Install the front mud guard. Refer to Rear Mud Flap Guard Replacement.
  3. Install the front wheel. Refer to Tire and Wheel Removal and Installation.
  4. Lower the vehicle.