GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Holden 🢒 2008 🢒 Lumina Ute 🢒 Diagnostic Navigation 🢒 Programming and Setup 🢒 Console Trim Plate Replacement

Removal Procedure

    Object Number: 1939969 Size: SH

    Important: The front floor console front cover (1) is retained by clips.

  1. Grasp the front floor console front cover (1) at (A) and pull upwards to disengage the retaining clips from the floor console (2).

    2. Object Number: 1939970 Size: SH
  2. Disconnect the window and exterior mirror switch electrical connector (2).
  3. Disconnect the Traction Control/ESP and Power switch (if fitted) electrical connectors (3).
  4. Remove the front floor console front cover (1).

Installation Procedure

    Object Number: 1939970 Size: SH
  1. Connect the Traction Control/ESP and Power switch (if fitted) electrical connectors (3).
  2. Connect the window and exterior mirror switch electrical connectors (2).
  3. Install the front floor console front cover (1).

    4. Object Number: 1939969 Size: SH

    Important: The front floor console front cover (1) is retained by clips.

  4. Install the front floor console front cover (1) and push downwards at (A) to engage the retaining clips to the floor console (2).
  5. Test all switches for correct operation.