GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Holden 🢒 2008 🢒 Lumina Ute 🢒 Body Systems 🢒 Wipers and Washers 🢒 Windshield Washer Solvent Level Switch Replacement

Removal Procedure
  1. Remove the radiator assembly. Refer to Radiator Replacement.

    2. Object Number: 1962260 Size: SH
  2. Disconnect the washer fluid level switch electrical connector (1).
  3. Place a suitable container under the washer fluid level switch (2).
  4. Remove the washer fluid level switch (2) from the washer fluid container and discard the rubber seal.

Installation Procedure

    Object Number: 1962260 Size: SH

    Important: Insert the washer fluid level switch into the washer fluid container until fully seated.

  1. Install the washer fluid level switch (2) into the washer fluid container.
  2. Connect the washer fluid level switch electrical connector (1).
  3. Fill the washer solvent container with washer solvent.
  4. Install the radiator assembly. Refer to Radiator Replacement.