For 1990-2009 cars only
Removal Procedure
- Remove the radiator assembly. Refer to Radiator Replacement .
- Use a suitable tool to separate the windshield washer hose (1) from the washer pump (2).
- Detach the washer hose (2) from the radiator air intake baffle (1).
- Detach the washer hose (1) from the fender retaining clips (2).
- Disconnect the washer hose (2) from the washer hose connection (1).
- Remove the windshield washer hose (2).
Important: Take care not to pierce the washer hose. Use a suitable cap to cap off the washer motor after removing the hose to prevent spillage.
Installation Procedure
- Attach the washer hose (2) to the washer hose connection (1).
- Attach the washer hose (1) to the fender retaining clips (2).
- Route the washer hose (2) through the radiator air intake baffle (1).
- Install the washer hose (1) onto the washer pump (2).
- Install the radiator assembly. Refer to Radiator Replacement .
- Test the washer pump for correct operation.
Removal Procedure (Air Inlet Grill Hose)
- Remove the wiper arms. Refer to Windshield Wiper Arm Replacement .
- Remove the air inlet grille. Refer to Air Inlet Grille Panel Replacement .
- Remove the retaining torx screws (1) from the air inlet grille brace.
- Remove the air inlet grille brace from the air inlet grille.
- Detach and remove the air inlet grille hose (1) from the air inlet grille (2).
Installation Procedure (Air Inlet Grill Hose)
- Attach the air inlet grille hose (1) to the air inlet grille (2).
- Install the air inlet grille brace (2) to the air inlet grille
- Install the air inlet grille brace (2) to the air inlet grille retaining torx screws (1).
- Install the air inlet grille. Refer to Air Inlet Grille Panel Replacement .
- Install the wiper arms. Refer to Windshield Wiper Arm Replacement .
Notice: Refer to Fastener Notice in the Preface section.
Tighten
Tighten the torx screws to (2.0 N·m
(18 lb in).
