Caution: Refer to Safety Glasses Caution in the Preface section.
Caution: Refer to Vehicle Lifting Caution in the Preface section.
Important: Mark the location of the bolt and nut relative to the Y-Link for correct re-assembly.
Important: Prevailing torque nuts must be discarded after removal.
Discard the nut.
Discard the nut.
Important: The Y-Link to subframe retaining bolt (3) and nut (4) must not to be fully tightened at this stage.
Do not fully tighten at this stage.
Important: The Y-Link to knuckle retaining bolt (1) and nut (2) must not to be fully tightened at this stage.
Do not fully tighten at this stage.
Notice: Refer to Fastener Notice in the Preface section.
Important: The weight of the vehicle must be on a level surface and on all four wheels before fully tightening the nuts and bolts.
Tighten
Tighten the bolt and nut to 100 N·m
(74 lb ft).
Tighten
Tighten the bolt and nut a first pass to 40 N·m
(30 lb ft).
Tighten the bolt and nut a final pass 120 Degrees.