Tools Required
KM6067 Radio Removal Tool
Removal Procedure
- Remove the navigation module. Refer to Navigation Module Replacement.
- Remove the navigation module assembly retaining screws (1).
- Remove the navigation module carrier from the I/P compartment.
Installation Procedure
- Install the navigation module carrier into the I/P
compartment.
Notice: Refer to Fastener Notice in the Preface section.
- Install the navigation module assembly retaining screws (1).
Tighten
Tighten the screws to 2 N·m (18 lb in).
- Install the navigation module. Refer to Navigation Module Replacement.