GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Holden 🢒 2009 🢒 Sportwagon 🢒 Body Hardware and Trim 🢒 Interior Trim and Paneling 🢒 Body Lock Pillar Inner Panel Bracket Replacement

Removal Procedure
  1. Remove the rear seat belt. Refer to Rear Seat Belt Replacement.

    2. Object Number: 2131763 Size: SH
  2. Remove the rear seat back cushion stop striker (4) from the body lock pillar inner panel bracket (5).
  3. Remove the body lock pillar inner panel bracket nuts (3) from the body lock pillar inner panel bracket retaining studs (2).
  4. Remove the body lock pillar inner panel bracket (5) from the vehicle body (1).

Installation Procedure

    Object Number: 2131763 Size: SH
  1. Install the body lock pillar inner panel bracket (5) to the vehicle body (1).

    2. Notice: Refer to Fastener Notice in the Preface section.

  2. Install the body lock pillar inner panel bracket nuts (3) to the body lock pillar inner panel bracket retaining studs (2).

    3. Tighten
    Tighten the nuts to 35 N·m (26 lb ft).

    Notice: Refer to Fastener Notice in the Preface section.

  3. Install the rear seat back cushion stop striker (4) to the body lock pillar inner panel bracket (5).

    4. Tighten
    Tighten the striker to 70 N·m (52 lb ft).

  4. Install the rear seat belt. Refer to Rear Seat Belt Replacement.