For 1990-2009 cars only
- Remove the fuel rail stop bracket to intake manifold retaining bolt (1).
- Remove the fuel rail stop bracket (2).
- Remove the fuel rail attaching bolts (2), ground strap (1).
- Lift evenly on both sides of the fuel rail (3) , and remove the fuel rail (3).
- Remove the injector lower O-ring seal from the spray tip end of each injector.
- Discard the O-ring seals.
Caution: Refer to Fuel Rail Stop Bracket Installation Caution in the Preface section.
Important:
• The intake manifold, throttle body, fuel injection rail and fuel injectors
may be removed as an assembly. If not servicing the individual components, remove
the intake manifold as a complete assembly. • Do not separate the fuel injectors from the fuel rail, unless component
service is required. • Use cleanliness and care when handling the fuel system components. Do
not allow dirt or debris to enter the fuel injectors or fuel rail components. Cap
ends, as necessary.
