GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Holden 🢒 2007 🢒 VE Sedan 🢒 Suspension 🢒 Suspension General Diagnosis 🢒 Stabilizer Shaft Replacement

Removal Procedure

    Caution: Refer to Safety Glasses Caution in the Preface section.

    Caution: Refer to Vehicle Lifting Caution in the Preface section.

  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Disconnect the stabiliser bar links from the stabiliser bar. Refer to Stabilizer Shaft Link Replacement .
  3. Remove the stabiliser bar insulators. Refer to Stabilizer Shaft Insulator Replacement .

    4. Caution: Refer to General Repair Instructions in the Preface section.


    Object Number: 1958992 Size: SH
  4. Remove the stabiliser bar (1) from the vehicle.
  5. Inspect all parts for wear and damage.

Installation Procedure

    Notice: Refer to General Repair Instructions in the Preface section.


    Object Number: 1958992 Size: SH
  1. Install the stabiliser bar (1) to the vehicle.
  2. Install the stabiliser bar insulators and brackets. Refer to Stabilizer Shaft Insulator Replacement .
  3. Install the stabiliser bar links to the stabiliser bar. Refer to Stabilizer Shaft Link Replacement .
  4. Remove the safety stands.
  5. Lower the vehicle to the ground.