GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Holden 🢒 2007 🢒 VE Sedan 🢒 Preface 🢒 Cautions and Notices 🢒 Exhaust Manifold Removal - Right Side

    Caution: Refer to Exhaust Service Caution in the Preface section.

    Caution: Refer to Protective Goggles and Glove Caution in the Preface section.


    Object Number: 1957856 Size: SH
  1. Remove the exhaust manifold heat shield to exhaust manifold retaining bolts (1).
  2. Remove the exhaust manifold heat shield (2).

    3. Object Number: 1957825 Size: SH
  3. Loosen the exhaust manifold to cylinder head retaining bolts (1) working from the outside to the centre.

    4. Important: Bolts with micro-encapsulated thread sealant must be discarded after removal.

    Important: Make sure all the bolt holes are thoroughly cleaned and all micro-encapsulated thread sealant is removed.

  4. Remove the exhaust manifold to cylinder head retaining bolts (1).

    5. Discard the bolts.

    Clean the bolt holes.


    Object Number: 1957843 Size: SH

    Important: The exhaust manifold gasket (1) and sealing ring (3) are single use parts. They must be discarded after removal.

  5. Remove the exhaust manifold (2).

    6. Discard the exhaust manifold gasket (1) and sealing ring (3).