Torque Converter Housing with Fluid Pump Installation. Holden VE Sedan 2008

For 1990-2009 cars only

Makes 🢒 Holden 🢒 2008 🢒 VE Sedan 🢒 Diagnostic Navigation 🢒 Vehicle Diagnostic Information 🢒 Torque Converter Housing with Fluid Pump Installation

Callout	Component Name
Notice: Refer to Fastener Notice in the Preface section.
1	NEW Fluid Pump Seal
2	Torque Converter (with Fluid Pump) Housing Assembly Notice: Refer to General Repair Instructions in the Preface section.
3	Bolts M10 x 50 (Quantity: 9) Tighten 72 N·m (53 lb. ft) in the sequence shown.
4	NEW Turbine Shaft (O-Ring) Seal