GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Holden 🢒 2008 🢒 VE Sedan 🢒 Body Repair 🢒 Bolted Exterior Body Panels and Closures 🢒 Rear Door Frame Applique Replacement

Removal Procedure
  1. Remove the door trim panel. Refer to Rear Side Door Trim Panel Replacement .
  2. Remove the window inner belt sealing strip. Refer to Rear Side Door Window Inner Sealing Strip Replacement .
  3. Remove the door garnish molding. Refer to Front and Rear Side Door Window Garnish Molding Replacement .

    4. Object Number: 1939973 Size: SH

    Important: Pry out the window inner sealing strip (1) then pull by hand to expose the door applique retaining screws.

  4. Detach the front part of the window inner sealing strip (1) from the door (2).

    5. Object Number: 1939971 Size: SH
  5. Remove the door applique to door retaining screws (1).

    6. Object Number: 1939972 Size: SH
  6. Remove the door applique (1) from the door (2).

Installation Procedure

    Object Number: 1939972 Size: SH
  1. Position the door applique (1) to the door (2).

    2. Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 1939971 Size: SH
  2. Install the door applique to door retaining screws (1).

    3. Tighten
    Tighten the screws to 3 N-m (27 lb in).


    Object Number: 1939973 Size: SH
  3. Attach the attach part of the window inner sealing strip (1) to the door (2).
  4. Install the door garnish molding.Refer to Front and Rear Side Door Window Garnish Molding Replacement .
  5. Install the window inner belt sealing strip. Refer to Rear Side Door Window Inner Sealing Strip Replacement .
  6. Install the door trim panel. Refer to Rear Side Door Trim Panel Replacement .