GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Holden 🢒 2008 🢒 VE Sedan 🢒 Preface 🢒 Cautions and Notices 🢒 Roof Weld Joint Reveal Molding Replacement

Removal Procedure

    Important: If the roof weld joint reveal moulding cracks, breaks or is damaged in any way, replace the moulding.

    Important: Take care not to damage the paint on the vehicle when prying the roof weld joint reveal moulding from the roof.


    Object Number: 1943211 Size: SH
  1. Starting at the windshield pillar rear, carefully pry off the roof weld joint reveal moulding from the roof weld joint, taking care not to break the roof weld joint reveal moulding retaining clips (2).
  2. Remove the roof weld joint reveal moulding (1).
  3. Clean the accessible roof weld joint with a suitable cleaning solution, using a lint free cloth.

Installation Procedure

    Object Number: 1943211 Size: SH

    Important: Make sure that the rear datum pin is positioned correctly.

  1. Position the roof weld joint reveal moulding on the vehicle and slide the rear end of the moulding into the rear moulding retainer.
  2. Seat the roof weld joint reveal moulding in the roof weld joint and starting at the rear, carefully engage the roof weld joint reveal moulding retaining clips (2) into position.