GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Holden 🢒 2008 🢒 VE Sedan 🢒 Preface 🢒 Cautions and Notices 🢒 Rear Seat Cushion Cover and Pad Replacement

Removal Procedure

  1. Remove the seat cushion. Refer to Rear Seat Cushion Replacement.
  2. Place seat cushion on a suitable work surface.

    3. Object Number: 1943523 Size: SH
  3. Detach the cushion cover from the base pad by uncliping the cushion cover retaining clip (1), carry this procedure until all the retaining clips are detach.

    4. Object Number: 1943524 Size: SH
  4. Detach the back of the seat cushion cover, by unhooking the J-strips from the base pad.

    5. Object Number: 1943541 Size: SH
  5. Detach the seat belt cross strap, by unhooking the J-strips from the base pad.

    6. Object Number: 1943526 Size: SH
  6. Detach the front of the seat cushion cover.
  7. Turn seat cushion over.

    8. Object Number: 1943527 Size: SH
  8. Remove the seat cushion cover.

Installation Procedure

    Object Number: 1943543 Size: SH
  1. Install the seat cushion cover.
  2. Turn the seat cushion over.

    3. Important: When installing the front of the cover, ensure the corners are pulled tight.

  3. Install the front of the seat cushion cover.

    4. Object Number: 1943525 Size: SH
  4. Install the seat belt cross strap, by hooking the J-strips onto the base pad.

    5. Object Number: 1943542 Size: SH
  5. Install the back of the seat cushion cover.

    6. Object Number: 1943523 Size: SH
  6. Attach the cushion cover to the base pad by attaching the cushion cover retaining clip (1), listen for an audible click to confirm fitting.
  7. Firmly run your finger in the seat cushion channels, to ensure a correct fitting.
  8. Install the seat cushion. Refer to Rear Seat Cushion Replacement.