GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Holden 🢒 2008 🢒 VE Sedan 🢒 General Information 🢒 General Information 🢒 Assist Handle Replacement

Removal Procedure - Up to xx/xx

    Object Number: 1939455 Size: SH
  1. Pull the assist handle (3) into the down position.
  2. Prise open the assist handle screw covers (1).
  3. Remove the two retaining torx screws (2).

    4. Important: When removing the assist handle assembly, take care not to damage the locating pins.

  4. Remove the assist handle assembly (3).

Installation Procedure Up to xx/xx

    Object Number: 1939455 Size: SH
  1. Install the assist handle assembly (3) ensuring that the locating pins are correctly aligned with the locating holes and spacer behind the headlining.
  2. Install the assist handle retaining screws (2).

    3. Tighten
    Tighten the assist handle retaining screws to 2.0  N·m (18 lb in).

  3. Close the assist handle screw covers (1).