GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Holden 🢒 2008 🢒 VE Ute 🢒 Engine 🢒 Engine Electrical 🢒 Battery Negative Cable Disconnection and Connection

Removal Procedure

    Object Number: 2017396 Size: SH
  1. Lift the rear window shelf trim battery access panel (1) upwards to gain access to the battery.

    2. Caution: Refer to Battery Disconnect Caution in the Preface section.


    Object Number: 2017926 Size: SH
  2. Remove the battery negative cable to battery terminal retaining nut (2).

    3. Important: Clean any existing corrosion from the battery negative terminal (1) and the battery negative cable (3).

  3. Remove the battery negative cable (3) from the battery negative terminal (1).

Installation Procedure

    Caution: Refer to Battery Disconnect Caution in the Preface section.


    Object Number: 2017926 Size: SH

    Important: Clean any existing corrosion from the battery negative terminal (1) and the battery negative cable (3).

  1. Install the battery negative cable (3) to the battery negative terminal (1).

    2. Notice: Refer to Fastener Notice in the Preface section.

  2. Install the battery negative cable to battery negative terminal retaining nut (2).

    3. Tighten
    Tighten the nut to 17 N·m (13 lb ft).


    Object Number: 2017396 Size: SH
  3. Close the rear window shelf trim battery access panel (1).