GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Holden 🢒 2008 🢒 VE Ute 🢒 Diagnostic Navigation 🢒 Vehicle Diagnostic Information 🢒 Dome Lamp Replacement

Removal Procedure

    Caution: Refer to Battery Disconnect Caution in the Preface section.

  1. Disconnect the battery ground cable. Refer to Battery Negative Cable Disconnection and Connection.

    2. Important: The headliner can be easily damaged or discoloured. Use care when working in the area of the headliner.


    Object Number: 2025380 Size: SH
  2. Open the sun glasses storage compartment (1) to reveal the retaining screw (2).
  3. Remove the dome lamp assembly to roof retaining screw (2).

    4. Important: Grasp the dome lamp assembly (4) and pull downwards to remove the dome lamp assembly (4) from the headliner assembly (3).

  4. Remove the dome lamp assembly (4) from the headliner assembly (3).

    5. Object Number: 2025381 Size: SH
  5. Disconnect the dome lamp assembly electrical connector (2).
  6. Disconnect the Bluetooth microphone electrical connector (1) if fitted.

Installation Procedure

    Object Number: 2025381 Size: SH
  1. Install the dome lamp assembly (3) to the vehicle.
  2. Connect the bluetooth microphone connector (1) if fitted.
  3. Connect the dome lamp assembly electrical connector (2).

    4. Object Number: 2025382 Size: SH
  4. Insert the two locating arms (1) into the headlining assembly (4).
  5. Push the dome lamp assembly (5) up into the headlining assembly (4).
  6. Install the dome lamp assembly to roof retaining screw (3).

    7. Tighten
    Tighten the screw to 2  N·m (18 lb in).

  7. Close the sun glasses storage compartment (2).
  8. Connect the battery ground cable. Refer to Battery Negative Cable Disconnection and Connection.