Body Side Rear Trim Panel Stowage Compartment Outer Cover Replacement for Holden VE Ute 2008

1. Remove the cargo liner. Refer to Cargo Box Liner Replacement .
2. Remove the rear body rail end cover. Refer to Pickup Box Cover Side Rail End Cover Replacement .
3. Remove the cargo tie down plates. Refer to Cargo Tie Down Loop Bracket Replacement .



4. Remove the rear body rail cover to body retaining bolts (1).
5. Remove the rear body rail cover (2) from the vehicle (3).

1. Install the rear body rail cover (2) to the vehicle (3).

Notice: Refer to Fastener Notice in the Preface section.

2. Install the rear body rail cover to body retaining bolts (1).

Tighten
Tighten the bolts to 6 N·m (53 lb in).

3. Install the rear body rail end cover. Refer to Pickup Box Cover Side Rail End Cover Replacement .
4. Install the cargo tie down plates. Refer to Cargo Tie Down Loop Bracket Replacement .
5. Install the cargo liner. Refer to Cargo Box Liner Replacement .