The keyless entry system is a supplementary vehicle entry device. Radio frequency
interference or discharged batteries may disable the system.
Keyless entry allows you to operate the following features:
• | The illuminated entry lamps. |
The keyless entry system has the following main components:
• | The remote function actuator (RFA) module -- When you press a button
on the transmitter, the transmitter sends a signal to the RFA module. The RFA module
receives the signal and sends a GMLAN serial data message requesting the appropriate
function. |
Unlock Driver Door Only
Momentarily press the UNLOCK button in order to perform the following functions:
• | Unlock the driver door only. |
• | Illuminate the interior lamps for approximately 20 seconds or until
the ignition is turned ON. |
• | Flash the turn signal lamps (if the ignition is turned OFF and the doors
are closed). |
• | Identify the driver to the driver information centre (DIC). The DIC will
then revert to the station presets, the last station, the last volume settings, and
the last playback mode used by that driver. |
Unlock Front Doors - Second Operation
Momentarily press the UNLOCK button a second time, within 5 seconds of
the first press, in order to perform the following functions:
• | Unlock the passenger door. |
• | Illuminate the interior lamps for approximately 20 seconds or until
the ignition is turned ON. |
Lock Front Doors
Press the LOCK button in order to perform the following functions:
• | Immediately turn OFF the interior lamps. |
• | Flash the turn signal lamps (if the ignition is OFF and the doors are
closed). |
• | Chirp the horn (if the ignition is OFF and the doors are closed). |
Panic Alarm Function
A single press of the panic button performs the following functions:
• | Illuminates the interior lamps. |
• | Flashes the daytime running lamps for 2 minutes or until the following
conditions occur: |
- | The panic button is pressed again. |
- | The ignition switch is turned to the RUN position with a valid key. |
Press and hold the panic button performs the following functions:
• | The horn will sound continuously. |
• | The turn signal lamps will flash. |
This will continue until the button is pressed again or until the key is placed
in the ignition.