GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

  1. Remove the close out panel. Refer to Instrument Panel Insulator Panel Replacement - Left Side.
  2. Remove the instrument panel (I/P) outer trim cover. Refer to Instrument Panel Outer Trim Cover Replacement.

  3. Object Number: 1957057  Size: SH
  4. Remove the I/P compartment assembly (2) lower retaining screws (1).

  5. Object Number: 2017856  Size: SH
  6. Open the I/P compartment assembly (2) door.
  7. Using a suitable tool pry the screw covers (1) from the I/P compartment (2).

  8. Object Number: 1957062  Size: SH
  9. Remove the I/P compartment (2) upper retaining screws (1).
  10. Remove the I/P compartment (2).

  11. Object Number: 2024475  Size: SH
  12. If fitted, disconnect the I/P compartment electrical connector (1) from the main wiring harness.

Disassemble Procedure


    Object Number: 1957073  Size: SH
  1. Remove the I/P compartment damper cord by detaching the cord from the securing hook (4).
  2. Remove the I/P compartment damper retaining screws (3).
  3. Remove the I/P compartment damper (2) from the I/P compartment (1).

  4. Object Number: 1957784  Size: SH
  5. Remove the I/P compartment door hinge retaining pins (2), located on either side of the I/P compartment door.
  6. Remove the I/P compartment door (1) from the I/P compartment.

Assemble Procedure


    Object Number: 1957784  Size: SH
  1. Align the I/P compartment door (1) to the I/P compartment.
  2. Install the I/P compartment door retaining pins (2).

  3. Object Number: 1957073  Size: SH
  4. Install the I/P compartment damper (2) to the I/P compartment (1).
  5. Install the I/P compartment damper retaining screws (3).
  6. Tighten
    Tighten the screws (3) to 2  N·m (18 lb in).

  7. Install the I/P compartment damper cord by attaching the securing hook (4).

Installation Procedure


    Object Number: 2024475  Size: SH
  1. If fitted, connect the I/P compartment electrical connecter (1) to the main wiring harness.
  2. Align the I/P compartment into the I/P upper pad.
  3. Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 1957062  Size: SH
  4. Install the I/P compartment (2) upper retaining screws (1).
  5. Tighten
    Tighten the screws (1) to 2  N·m (18 lb in).


    Object Number: 2017856  Size: SH
  6. Install the screw covers (1) to the instrument panel compartment (2).
  7. Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 1957057  Size: SH
  8. Install the I/P compartment (2) lower retaining screws (1).
  9. Tighten
    Tighten the screws (1) to 2  N·m (18 lb in).

  10. Install the instrument panel outer trim cover. Refer to Instrument Panel Outer Trim Cover Replacement.
  11. Install the close out panel. Refer to Instrument Panel Insulator Panel Replacement - Left Side.
  12. Test all electrical components for corrected operation.