GM Service Manual Online
For 1990-2009 cars only

Lower Intake Manifold Assemble Procedure


    Object Number: 1961585  Size: SH
  1. Install the fuel injector rail (2).
  2. Notice: Refer to Fastener Notice in the Preface section.

  3. Install the fuel injector rail to lower intake manifold retaining bolts (1).
  4. Tighten
    Tighten the fuel injector rail bolts to 10 N·m (89 lb in).


    Object Number: 1961759  Size: SH
  5. Install the fuel injector wiring harness (1).

Upper Intake Manifold Assemble Procedure


    Object Number: 1961584  Size: SH
  1. Install the engine cover ball studs (1).
  2. Tighten
    Tighten the engine cover ball studs to 7 N·m (62 lb in).


    Object Number: 1961583  Size: SH
  3. Install the Intake Manifold Runner Control (IMRC) flap (1).
  4. Install the IMRC flap to upper intake manifold retaining bolts (2).
  5. Tighten
    Tighten the bolts to 10 N·m (89 lb in).


    Object Number: 1961582  Size: SH
  6. Install the NEW throttle body gasket (3) to the intake manifold (4).
  7. Install the throttle body (2).
  8. Install the throttle body bolts to upper intake manifold retaining bolts (1).
  9. Tighten
    Tighten the bolts to 10 N·m (89 lb in).

Upper to Lower Intake Manifold Assemble Procedure


    Object Number: 1960825  Size: SH

    Important: DO NOT reuse the upper-to-lower intake manifold gasket and the intake manifold-to-cylinder head sealing gaskets.

  1. Install the NEW upper-to-lower intake manifold gaskets (1).

  2. Object Number: 1960824  Size: SH
  3. Install the upper intake manifold (1) to the lower intake manifold (2).

  4. Object Number: 1960823  Size: SH
  5. Install the fuel injector wiring harness bracket to upper intake manifold retaining bolt (1).
  6. Tighten
    Tighten the bolt to 10 N·m (89 lb in).


    Object Number: 1960822  Size: SH
  7. Install the upper-to-lower intake manifold retaining bolts (1).
  8. Tighten
    Tighten bolts to 23 N·m (17 lb ft).