Important: All transmitters which are to be recognized by the remote function actuator (RFA) must be programmed in a single programming sequence. If the system is placed in program mode it will erase all previously programmed transmitters upon the receipt of the programming signal from the first transmitter. Up to 4 transmitters can be programmed. Do not operate or program the transmitters in the vicinity of other vehicles that are in the keyless entry program mode. This prevents the programming of the transmitters to the incorrect vehicle.
Important: When the RFA is programmed the remote key and TPMS sensor data will be erased.
• | Erase all and program remotes. |
• | Add additional remotes. |
Important: The scan tool must stay connected until all of the transmitters are programmed.